Dimming scenarios Without detection
LED
At nightfall, the luminaire is switched on at 50% of its maximum output for 3 hours. It then reduces its output to 15% to provide safety lighting throughout the night. In the early morning, it ends its operation with an hour at the same level as at the beginning of the night.
50%
3h
1h
0% 15%
With motion detection in places with little nocturnal traffic At nightfall, the luminaire switches on at 50% of its maximum power for 3 hours. It then reduces its power to 12% to ensure safety lighting
100% LED
throughout the night. In the early morning, it ends its operation with an hour at the same level as at the beginning of the night. Throughout its operation, the dimming scenario can be overridden by motion detection (car, bike or pedestrian) with the light level rising to 100% for a short period. It maximises visibility to ensure safety and well-being for users.
50%
3h
1h
0% 12%
With motion detection in popular places
At nightfall, the luminaire is switched on at 20% of its maximum output for the whole night. When movement is detected (car, bicycle or pedestrian), the lighting level is temporarily increased to 100% to provide maximum safety and comfort to users. This dimming profile allows up to 450 detections per night.
100% LED
0% 20%
* This is just a selection of the dimming profiles available. We can customise the dimming scenario according to the requirements of your project.
14
Powered by FlippingBook