Hybrid 1K3 1-step

Schréder Australia Pty Ltd Bldg 4A, Parklands Estate, 21-23 South Street, Rydalmere, NSW 2116, Australia T: 1300 489 780 | ABN 17 604 331 937 www.sylvania-schreder.com

HYBRID DRIVER TYPICAL POLE MOUNTING LAYOUTS

The two off M5 lift screws on either side of the black section can be used as aids to installation for attaching rope, chain, hooks for lifting. These lift points are not for permanent mounting. Never lift driver over personal or any part of the body.

D3.B2 D3.T1

D3.T1

DIN RAIL

D3.B1

The space between adjacent drivers side by side should be a minimum of 25mm but ideally 50mm.

D2.T1

D2.B2 D2.B1 D2.B2 D2.B1

DIN RAIL

D2.B1

D1.T1 D1.T1

D1.T2 D1.T2

DIN RAIL

900

D1.B1 D1.B2

250

Three Door Pole ( ~ 22M to 30M )

Two Door Pole ( ~ 18M to 20M )

PAGE 7 OF 11

Document Version 2024-08

Rev: 23