Schréder - rešenja za industrijsko osvetljenje

INDU CONTILINE GEN2

IK 05 IK 03

IP 50

The INDU CONTILINE GEN2 trunking system offers versatility and openness to meet the requirements of any project.

The main alimentation can be placed in the centre or at the extremity of the trunk.

Modular, easy and efficient INDU CONTILINE GEN2 is a fully flexible 13 pole trunking system with tool-free module installation. With its unique, optional roof accessory, it is considerably more resistant to dust and water accumulation. Thanks to its additional, integrated cable duct, this system is IoT-ready! INDU CONTILINE GEN2 can be installed from the ground using a patented process. INDU CONTILINE GEN2 offers additional benefits including emergency lighting and optimal light distribution with low glare to create optimal working conditions in industrial environments.

TYPICAL LUMEN PACKAGE

INDU CONTILINE GEN2 1

8000lm

The T13 block enables a versatile positioning

INDU CONTILINE GEN2 2

12,400lm

In case of an emergency, an optional auxiliary battery (central UPS or local) provides 3 hours of safety lighting.

of the LED modules and combines power and control connections.

INDU CONTILINE GEN2 3

16,000lm

INDU CONTILINE GEN2 4

21,200lm

Lighting a warehouse SPECIFICATIONS Area: 30x24m Height: 9m Reflection coefficient: Floor: 20 | Ceiling: 70 | Walls: 50 Maintenance factor: 0.8

Solution with INDU CONTILINE GEN2 Results with 33 INDU CONTILINE GEN2 2

Around 1W/m 2 /100lx While fully meeting the strict specifications, INDU CONTILINE GEN2 limits the power consumption to 1,650W for a total surface of 720m 2 . It means 1.05W/m 2 /100lx. This high efficiency provides 40% energy savings compared to the most efficient luminaires equipped with 80W discharge lamps.

REQUIRED LEVELS

RESULTS WITH INDU CONTILINE GEN2

Illumination (Eav)

200lx

237lx

<28

16

Glare (UGR)

Uniformity (U o )

Min 0.4

0.60

Measurements done at floor height.

17

16

Powered by