Schréder - Solar lighting

Dimming scenarios Without detection

LED

At nightfall, the luminaire is switched on at 50% of its maximum output for 3 hours. It then reduces its output to 15% to provide safety lighting throughout the night. At sunrise, the light output returns to 50% for one hour before the luminaires switch off.

50%

0% 15%

With motion detection in places with little nocturnal traffic At nightfall, the luminaire switches on at 50% of its maximum power for 3 hours. It then reduces its power to 12% to ensure safety lighting throughout the night. At sunrise, the light output returns to 50% for one hour before the luminaires switch off. Throughout its operation, the dimming scenario can be overridden by motion detection (car, bike or pedestrian) with the light level rising to 100% for a short period. It maximises visibility to ensure safety and well-being for users. 50% 100% LED 3h 1h 0% 12%

With motion detection in popular places

At nightfall, the luminaire is switched on at 20% of its maximum output for the whole night. When movement is detected (car, bicycle or pedestrian), the lighting level is temporarily increased to 100% to provide maximum safety and comfort to users. This dimming profile allows up to 450 detections per night.

100% LED

0% 20%

* This is just a selection of the dimming profiles available. We can customise the dimming scenario according to the requirements of your project.

Smart dynamic lighting profile to prevent blackouts As the level of charge in the battery when the luminaire is switched on can vary according to the energy accumulated during the day, it is important to manage energy use intelligently. The on-board electronics divide the night into three parts and adjust the light level as necessary to avoid a blackout situation.