UL 1598 CSA C22 . 2 No . 250 . 0
IK 08
IP 66
MAIN APPLICATIONS
ROADS & MOTORWAYS
LARGE AREAS
TUNNELS & UNDERPASSES
INDUSTRIAL HALLS & WAREHOUSES
SPORT FACILITIES
ACCENT & ARCHITECTURAL
CAR PARKS
Designed to bring massive savings and benefits to area lighting
OMNISTAR provides a beneficial replacement for a full range of HID lighting fixtures in a variety of indoor and outdoor applications such as tunnels, docks, industrial buildings, sport facilities, large car parks, airports… This platform has been designed to provide an unrivalled combination of performance and flexibility for lighting areas where high lumen packages are needed with the added advantages of an LED solution: low energy consumption, improved visibility with white light, limited maintenance and longer life. Equipped with the latest cutting-edge technology for high performance, a long lifespan and an effective thermal management, OMNISTAR reduces energy and maintenance costs. OMNISTAR can be installed in various configurations (suspended, surface-mounted or post-top) with one to three optical units. OMNISTAR can operate with a large range of outdoor and tunnel control solutions (daylight sensors, dimming, remote management, ATS) and a building management system with the DALI protocol to further maximise energy savings by adapting the lighting levels according to the real needs of the place to be lit.
KEY ADVANTAGES
> Real beneficial LED alternative to HID floodlights for high- power applications > Flexibility: modular approach with wide range of lighting distributions > Easy to dim: can adapt to the different lighting regimes required > Highly efficient light distributions reduce the quantity of luminaires to be installed > Various mounting options and inclination possibilities on-site for optimal photometry > Explosion proof variant for use in industrial environments with a hazardous atmosphere > Compact size: for tunnels with restrictive heights and to avoid any damage > Various control options including remote management systems
OMNISTAR
1 optical unit
Recommended Installation height Typical luminaire output flux (range)
8 to 45m / 26’ to 148’
8,200 to 67,800lm
Power consumption
78W to 530W
Warm white (730 and 830), neutral white (740 and 940) or cool white (757 and 957) 220-240V / 120-277V / 347-480V 50-60Hz
Colour temperature
Nominal voltage
Surge protection
10Kv
For the latest information, visit us .schreder.com
216
Powered by FlippingBook