Planet
Circle Light Label criteria
Long-lasting, long use
Points 0
Points 5
Points 10
(6) The luminaire’s efficacy is the ratio between the output flux (F) and the consumed power (P). This measurement is carried out at 500mA with the maximum number of LEDs. When this configuration is not available, the variant with the maximum number of LEDs and highest current will be measured. (7) The mechanical criteria takes into account the IP and IK level of the luminaire. Our criteria is as follows: Level 1 Level 2 Level 3
Luminary efficacy 6
F/P < 110 lm/w
110 lm/w =< F/P < 140 lm/w L90/100.000 =< x < L95/100.000
140 lm/w =< F/P
Rated life of the LEDs Mechanical 7
x < L90/100.000
L95/100.000 =< x
Performance
Level 1
Level 2
Level 3
No control solution
Energy control
Dimmable
Dynamic
Proprietary smart solution ready
Open smart solution ready
Not available
Smart ready 8
Any luminaire with an IP level equal or below IP 54
Any luminaire with an IK level equal or below IK 07. Or any luminaire with an IP level between IP 54 and IP 66
Any luminaire with an IP level equal or over IP 66 and an IK level equal or above IK 08
Specific tools/ Impossible Specific tools/ Impossible Specific tools/ Impossible
Opening
Basic tools
Tool free
Optical unit
Basic tools
Tool free
Gear plate (driver, SPD, smart, ...)
Maintenance
Basic tools
Tool free
(8) A luminaire is considered smart ready if it can integrate an IoT solution. An open smart solution is a Nema or Zagha (ZD4I) socket. (9) This factor ensures that it is feasible and practical for a professional to access components after the luminaire has been put into service. (10) The replacement parts should be the same as the originals, but if this is not possible, equivalent spare parts that perform the same function to the same or higher performance level may be used. (11) The disassembly depth is the minimum number of steps required to remove a component from a product. (12) The criteria focuses on the luminaire’s main parts (body and reflector) with materials recognised by Schréder Group staff and R-Tech, Schréder’s Belgian R&D Centre.
Product sheet
In the box
On the website
On smart tag
Installation sheet
In the box
On the website
On smart tag
Asset data sheet
In the box
On the website
On smart tag
10 years after the announced end of life
Availability 10
Product warranty
Announced end of life
Refurbish
Use of a gear plate for some functional parts (allow different fixation method)
Use of a module for all the functional parts (allow different fixation method )
Directly to the mold (only one mechanical fixation method allowed)
Mechanical fixation method
Nondestructive disassembly
Disassembly depth 11
> 9
9 ≤ x < 7
≤ 7
End of life
Material separability
Not separable
/
All materials
Recycle
Material compatibility with recycling 12
No
/
Yes
21
Powered by FlippingBook