FLANGE PLATE MOUNTING
5
6
Place a levelling nut, plus washer, on each bolt.
Pole should be oriented in a way that performing any kind of maintenance is easy and safe.
7
8
4 x M18
172 N.m 126.9 lb.ft +1 -0 27
+0.7 -0
M18 Anchor Bolt
Flange Plate
M18 Nut Washer Washer
Concrete
M18 Nut Used for leveling pole
Put in place the column, guiding the electrical cables to the compartment base.
Fully tighten the nuts following the recommended torque values. Assemble the top washer and nut. Check and if necessary correct, the column’s verticality by turning the leveling nuts, underneath the flange plate.
Check the correct vertical alignment of the pole.
6/14
00-63-030 | DOC-0016143 Rev C | 11 -2019
www.schreder.com
Powered by FlippingBook