Vents
The SHUFFLE modules have protective vents. Installed outdoors these modules are continuously exposed to harsh environments such as rainstorms, dust, sand and high winds. During changing environmental conditions, pressure can build inside a sealed enclosure, putting stress on seals. Over time stress causes seals to fail, which allows water, corrosive liquids, salt and particulates to enter the enclosure and damage the internal electronics. The vents mounted on the 180 body equalize pressure and reduce condensation by allowing air to flow freely into and out of sealed enclosures. At the same time, they provide a durable barrier to protect the electronics from contaminants. These vents cannot be removed.
Machining
If necessary, machining certain parts is allowed if it doesn´t affect the integrity of the module. Precautions should be taken when machining a part as to maintain the safety and finishing (removing certain
finishing and protection can create areas of corrosion) of the module. Please contact us if you have doubts if a part can be machined.
33
DOC-0021067 revB
All rights reserved, © Schréder, 2022
Powered by FlippingBook