Mains and control cable
The mains and control cable powers the module through the 9-pin connector on the gear plate. The supplied length with this kit is 3,25 m | 10.67 ft.
Wire number
Power / Signals
1 2 3 4 5 6 7 8 9
Phase (L1) Neutral (N) Phase (Ls)
DALI + / (0-10V)+ DALI - / (0-10V)-
PIR +12V
PIR DI
Not used
Green / yellow = PE
POLE
PINOUT
1 2 3 4 5 6 7 8 9
L1
N
Ls
NOT CONNECTED
DALI / 1-10V + DALI / 1-10V -
PE
+12V (PIR)
DI (PIR)
24
DOC-0021067 revB
All rights reserved, © Schréder, 2022
Powered by FlippingBook