External Back
On the External Back , a stainless-steel bracket is mounted on the 180 body. The aluminum profile is machined and four M5 threaded holes are added to the 180 body. The device is mounted on the stainless-steel bracket. This bracket can be replaced or modified to adapt to the device fixation. The cabling is passed through the center hole, into the space between the extruded profile and the 180 body and through the cable grommet on the lateral side of the body. These passages secure the IP rating of the module. Additional devices can be mounted inside the module.
The maximum weight of the device must not be more than 20 kg | 44 lbs.
Devices with areas exposed to high winds or vibrations need further validations.
16
DOC-0021067 revB
All rights reserved, © Schréder, 2022
Powered by FlippingBook