INSTALLATION
Before installation contact Schréder FAE (Field Application Engineer) for support.
During installation, ensure correct body position over the luminaire.
2
1
Q
A
FAE
Turning indications on top of controller.
Controller
3
Hold controller.
NEMA Socket
Align the longer pin (Neutral) first.
4
Align the controller power pins with slots in the socket.
Check if the surfaces between the controller and NEMA socket are parallel and plug in.
Push the controller firmly down. Make sure it is vertically aligned.
5
6
± 55 N (12.5 lbf)
1
2
Correct position: vertical
Incorrect position: twisted
//
//
www.schreder.com /4 2
DOC-0020638 OWLET IV NEMA-INS-B | 10-2022
Powered by FlippingBook