OPTICAL COMPARTMENT IP 66 CONTROL GEAR IP 44 I K 09
Design: Michel Tortel
Key advantages
• Unique aesthetic design • Creation of ambiance • Asymmetrical and symmetrical light distributions • Low height solution • Low energy consumption • Long term performance • Blue LEDs or DMX-controlled RGB embellishment crown (options) • Rear and wall brackets available
The Perla’s sober and pure line plays an important aesthetic role both by day and night. By day, the luminaire’s curve allows the sky and the architectural environment to peek through. By night, the LEDs, in a circular form, give life to a ring of light that floats in the darkness of the city. The blue LEDs further accentuate this presence. Depending on the chosen photometry, the Perla meets the necessary requirements for lighting streets, squares and parks. With a rear bracket, it can be installed, when necessary, to light a service road or a wide pavement. The wall bracket can be chosen to light narrow streets or any space where the presence of lighting columns is not permitted. The control gear is located in the support (lighting column or wall bracket).
Characteristics
Perla
Recommended installation height Typical luminaire output flux (range)
4 to 6m / 13’ to 20’
5,700lm to 6,600lm
Power consumption
73W
Colour temperature
Warm or neutral white
Nominal voltage
220-240V / 50-60Hz
Surge protection
10kV
Main applications
URBAN & RESIDENTIAL STREETS
BIKE & PEDESTRIAN PATHS
SQUARES & PEDESTRIAN AREAS
CAR PARKS BRIDGES RAILWAY STATIONS & METROS
13
Powered by FlippingBook