Construction Details The luminaire consists of an LED engine, power supply and spigot compartment. This allows the easy installation of the LED engine by means of a hinging action onto a spigot base casting. It is secured by stainless steel latches and an access screw. The LED engine, consisting of the LED light source and the power supply, can be easily replaced or upgraded. Both compartments are rated IP 66. Electronic temperature monitoring prevents overheating of LEDs and power supply, positioned directly next to LEDs (ThermiX ® ). The power supply is automatically disengaged when opening the luminaire. The luminaire housing is manufactured of marine grade aluminium. The power factor is rated at ≥0,95.
Ordering Information Example: LEDFLOODMA160265N5366A1G NR
LEDFLOOD
Circularity concept
Circularity focuses on reducing the environmental burden by valorising the flow of all materials. It is mainly defined in opposition to the traditional linear economy: take, make and dispose. In a circular economy, products are part of a value network where they will be used for as long as possible. Then, depending on their characteristics, they can be reused, refurbished, upgraded or recycled. BEKA Schréder takes circular economy into account, right from the offset. Before we start to design our products, we incorporate it into their DNA. After a careful analysis of the potential circularity of our luminaires, we decided to introduce a “circular lighting” product label. This label acts as a circular indicator for our customers. It clearly designates products that are optimised for circular economy through 12 objective criteria.
extracting raw materials
Surge Protection
Switching/ Dimming Control
ID LED Watt
LED Colour
Optic (1)
Colour
Protector
A Aluminium finish (unpainted) S Pearl Light Grey (RAL 9022), Textured finish B Black (RAL 9017), Textured finish W White (RAL 9016), Textured finish O Painted Other (RAL / Finish [Brilliant/Matt])
50 50 50 60 60 60 60 80 80 80
55 78 111 65 93 111 131 84 122 147 151 217 179 257 209 254 239 265
5304 5304-W (2)
N Neutral white (4000K) W Warm white (3000K) C Cool white (5700K)
1 10kV 2 20kV
G Glass clear P Polycarbonate
DL Downward facing daylight switch N3 NEMA 3-Pin Socket Only N7 NEMA 7-Pin Socket Only NR
parts supply
5355 5356 5357 5357-W
recycle
5358 5359 5366 5405 5407
NEMA complete with Royce Thomson DLS NS NEMA complete with Spectrum DLS 3D NEMA 3-Pin complete with dummy link 7D NEMA 7-Pin complete with dummy link 3I NEMA 3-Pin complete with plug-in 20kV surge protection 7I NEMA 7-Pin complete with plug-in 20kV surge protection CM Schréder EXEDRA CM TO DIM (Optidim)
manufacturing
parts harvesting
100 100 120 120 140 140 160 160
refurbish
distribution
Circular highlights:
service
•
Tool-free opening of the gear compartment for easy maintenance
user
•
Less than 9 steps to completely disassemble the luminaire
incineration & landfill
(1) Custom combinations of lenses/optics to suit the project are available on request (2) Only applicable to 80 LED, 120 LED and 160 LED versions
•
Materials with a high rate of recyclability
Custom Options
Star rating:
Switching/Dimming Control
Integrated Schréder ITERRA
Nominal voltage
90-305V - 50Hz
Mounting
Stainless steel stirrup
Vandal-resistant
Vandal-resistant version, preventing unauthorised access to the luminaire by means of a special coded access screw
Theft-proof
Theft-proof version, preventing removal of the luminaire on a ø42mm spigot (this requires a pre-drilled spigot)
It was designed to be cost-efficient
It was built to last but not with circular economy requirements
It was developed to meet most of circular economy requirements
It was developed to fully meet circular economy requirements
Tool theft-proof
Tool to open access screw for vandal-resistant and theft-proof version
498
499
Powered by FlippingBook