Key Features
In places with little nocturnal activity, lighting can be dimmed to a minimum most of the time. By using passive infrared (PIR) sensors, the level of light can be raised as soon as a pedestrian or a slow vehicle is detected in the area. Each luminaire level can be configured individually with several parametres such as minimum and maximum light output, delay period and ON/OFF duration time. PIR sensors can be used in an autonomous or interoperable network. Passive Infrared (PIR) Motion Sensor (optional)
High-pressure die-cast aluminium housing
Surge protection 10kV/10kA
Installation height: 2m
Electronic temperature monitoring maintains performance over time
2
The indirect reflector design has been specifically developed to not only provide glare-free lighting, but also a high-performing light distribution.
Sensor detection area
1
0
1
2
3
4
5
6
7
Trigger distance from sensor (m)
Installation height: 3m
3
2
Sensor detection area
1
0
1
2
3
4
5
6
7
Trigger distance from sensor (m)
Installation height: 5m
The QVAL's design is optimising the thermal operating environment around the LEDs and electronic gear
5
4
3
Sensor detection area
2
1
0
1
2
3
4
5
6
7
Optional PIR motion sensor and dimming
Optimised design for easy installation
Trigger distance from sensor (m)
406
407
Powered by FlippingBook