Performance
Characteristics
GENERAL INFORMATION Recommended installation height
OPTICAL INFORMATION LED colour temperature 4000K (Neutral white 840) Colour rendering index (CRI) ≥ 80 (Neutral white 840)
Power consumption (W)
Nominal efficacy (lm/W)
Luminaire output flux (lm)
Luminaire efficacy (lm/W)
Photometry
Nominal flux (lm) (*)
Up to 7m
FutureProof
Easy replacement of the photometric engine and electronic assembly on-site
Number of LEDs
Current (mA)
Line Current (A)
Luminaire
Typical
Typical
Typical
Typical
Typical
OPERATING CONDITIONS Operating temperature range (Ta)
32
700
0.08
2870
18
159
2700
150
Driver included
Yes
-35°C up to +45°C
Optic 4410
ROHS compliant
Yes
64
700
0.15
5740
36
159
5338
148
Testing standard
SANS 60598, SANS 62262
LIFETIME OF THE LEDS @ TQ 25°C For all versions
Tolerance on LED flu x is ± 7% and on total luminaire power ± 5% (*) The nominal flux is an indicative LED flux @ Tj 25°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental conditions (e.g. temperature and pollution) and the optical efficiency of luminaire. The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology.
HOUSING AND FINISH Housing
80,000h - L70B10
High-pressure die-cast aluminium
LIFETIME OF THE DRIVER @ TQ 25°C For all versions
Optic
Acrylic PMMA
100,000h ≤10% failure rate
Protector
Glass
Housing finish
Black (RAL 9017), Textured finish
Light Distribution
Tightness level IP 66 Access for maintenance Easy access to the gear compartment
4410 optic
ELECTRICAL INFORMATION Electrical class
EU class I
180
150
Nominal voltage
198-264V – 50Hz
Power factor
> 95% at full load
120
Surge protection
10kV / 10kA
90
Electromagnetic compatibility (EMC)
SANS 55015:2013/A1:2015, SANS 61000-3-2:2014, SANS 61000-3- 3:2013, SANS 61547:2009, SANS 62493:2015
Construction Details The QVAL's design is optimising the thermal operating environment around the LEDs and electronic gear, enabling the long useful lifetime (80 000hrs, L70) and low maintenance. The indirect reflector design has been specifically developed to not only provide glare-free lighting, but also a high-performing light distribution. The QVAL can be spaced twice as wide as the 70W HPS equivalent. The luminaire housing is manufactured of corrosion- resistant high-pressure die-cast aluminium. All screws, clamps and fasteners are made of stainless
100
300 400 200
60
cd/klm
30
DIMENSIONS AND MOUNTING AxBxC (mm)
0
200x340x134
0°/180°
90°/270°
Weight (kg)
Standard: 4.4 With sensor: 4.6
Horizontal Illuminance
steel. Helicoils can be supplied optionally. Electronic temperature monitoring prevents
QVAL 36W Optic 4410 QVAL 18W Optic 4410
QVAL 36W Optic 4410 QVAL 18W Optic 4410
MH: 3m Isolux H (m)
MH: 4.5m Isolux H (m)
overheating of LEDs and power supply within the LED compartment (ThermiX ® ). To maximize the reliability of the LEDs, the photometric engine and control gear compartment are completely sealed to IP 66. This ensures that the photometric performance is maintained over time. The QVAL offers dimming control options to further maximise energy savings and reduce maintenance costs. It is designed for LED light sources between 18W and 36W. The luminaire is power factor corrected to ≥0,95.
E (lx)
E (lx) 18W 36W
18W 36W
0
0
B
1H
1H
50
25
2.5 5
10 5
2H
2H
10 5
2.5 5
3H
3H
4H
4H
0.5
1
5H
5H
0.5
1
C
0 1H2H3H4H5H
0 1H2H3H4H5H
404
405
Powered by FlippingBook