Key Features
Integrated Movement & Daylight Sensor (optional)
Diameter of the detection cone as a function of height at maximum detection area without taking objects in the room into consideration. Stationary objects (walls, tables, floor-standing luminaires, etc.) located in the direct view of the sensor change the characteristics of the detection area. The mentioned values are typical minimum values depending on the environment and application the detection area may increase.
Ceiling mounted
Wall mounted
h
150°
h
d
150°
Sleek, slim design optimised for LED technology, versatile mounting and various wiring options
d
Sensitivity
100% 50% Detection diameter at 1 m/s moving speed (d)
h
0.5m
5.0m
2.5m
Energy Savings
1.0m
6.0m
3.0m
1.5m
7.0m
4.0m
Standard mounting clips
BEKA VAPOURLINE Standard
BEKA VAPOURLINE with Microwave Sensor 30% Energy Savings with 50% occupancy time (typical example)
2.0m
8.0m
5.0m
2.5m
8.0m
5.0m
3.0m
8.0m
5.0m
3.5m
7.5m
4.0m
4.0m
7.0m
3.0m
100%
4.5m
6.5m
3.0m
5.0m
6.0m
2.5m
70%
Triangle for suspended mounting
Low glare design for comfortable working conditions
Uniquely designed optical compartment to meet LED lifetime expectation (applicable to 4ft version)
5.5m
5.0m
2.0m
6.0m
4.5m
2.0m
6.5m
4.0m
2.0m
Construction Details The body is manufactured from injection-moulded, UV stable polycarbonate material. Mounting is facilitated through removable external stainless steel mounting brackets, which can accommodate either surface or suspension mounting. A silicon sponge gasket is fitted into a special groove in the housing. This, in conjunction with the tongue provided on the diffuser, ensures the optimal sealing of the total enclosure, thereby maintaining the IP 65 ingress protection rating. The diffuser is manufactured from injection-moulded, UV stable polycarbonate material. The highly effective internal prisms of the diffuser ensure an optimal distribution with a transmission value of ≥91%. The diffuser is secured in place through multiple sprung stainless steel clips which ensure the integrity of the IP rating. For the 4ft version, the LED modules are clipped into the diffusor, creating a protected and enclosed optical compartment within the luminaire. This will prevent any premature damage to the LEDs during installation or during maintenance. All control gear components are removable. Mains connections are by means of a suitable screw terminal block with a wire clamping contact.
5ft version
Integrated LED module on metal plate for optimal thermal dissipation
374
375
Powered by FlippingBook