Key Features
Ordering Information
Example: SERIES 20 BLK NW 9W HVBB
Four fixing holes to hold the trim ring casting to the base casting by stainless steel M5 Allen head screws, located outside the optical compartment.
Base casting manufactured from marine grade high- pressure die-cast aluminium, finished both outside and inside in white epoxy powder coating for added protection and reflectivity.
ID
Frame
Colour Options
LED Colour
Watt
Other Options
9W 13W 17W
X Quarter Grid
BLK Black (RAL 9017), Textured finish WHT White (RAL 9016), Textured finish SIL Pearl Light Grey (RAL 9022), Textured finish P/O Painted Other (RAL / Finish [Brilliant/Matt])
NW Neutral White (4000K)
HC Helicoil
It is designed to operate LEDs of up to 17W.
VR Vandal-resistant screws
Optional helicoil inserts for corrosion- resistant applications.
HV Helicoil & vandal-resistant screws BB Battery back-up version (4 hours)
Four mounting holes provided outside the optical compartment, ensuring the integrity of the certified IP rating. The mounting holes are raised 2mm from the base, preventing rainwater from running over the luminaire surface, and are also offset from the main axis in order to prevent accidental damage to conduits during the installation process.
Tongue provided on the base casting to fit into the silicon sponge gasket seated in the diffuser, thus achieving SABS certified IP 65 protection.
All control gear components bear the relevant international marks and are mounted directly onto the base casting, ensuring cool operation.
Custom Options
Correlated colour temperature
3000K (Warm white 830)
Integrated movement sensor Integrated Schréder ITERRA
Switching/Dimming Control
Construction Details The luminaire consists of a marine grade high-pressure die-cast aluminium (EN 1706 AC-44300) base and trim ring, and an opal high-impact acrylic diffuser. It is designed to operate LEDs from 1470lm (9W) to 2620lm (17W). The luminaire bears the SANS 60598-2-1 safety mark. The luminaire has a degree of protection that complies with SANS 60598-2-1. All base castings are finished both outside and inside in white epoxy powder coating for added protection and reflectivity. It is simple to install due to four mounting holes provided outside the optical compartment through lugs that form part of the base casting. The trim ring casting is mounted onto the base casting by stainless steel M5 Allen head screws, located outside the optical compartment. The fixing holes can be supplied with stainless steel helicoil inserts on request. An opal non-discolouring high-impact acrylic injection moulded diffuser is used throughout the range. It offers excellent vandal resistance, is highly translucent and will not discolour even when subjected to the harshest UV environments. A silicon sponge gasket is fitted into a special groove in the diffuser to prevent damage to the gasket during installation. It fits snugly over a tongue provided on the base casting, thus achieving the certified ingress protection rating of IP 65. All external screws, bolts and metals are stainless steel or non-corrosive material. Mains connections are by means of a suitable screw terminal block with a wire clamping contact. The power factor is rated at ≥0,9.
Emergency
Emergency version 3 hours maintained
Extras
Adaptor ring for surface wiring
358
359
Powered by FlippingBook