Characteristics
Performance
GENERAL INFORMATION Recommended installation height
ELECTRICAL INFORMATION Electrical class
Power consumption (W)
Nominal efficacy (lm/W)
Luminaire output flux (lm)
Luminaire efficacy (lm/W)
Photometry (**)
Nominal flux (lm) (*)
Up to 20m
EU class I
Nominal voltage
198-264V – 50Hz
FutureProof
Easy replacement of the photometric engine and electronic assembly on-site
Power factor
> 95% at full load
Driver Current (mA)
Number of LEDs
Line Current (A)
Luminaire
Typical
Typical
Typical
Typical
Typical
Surge protection
10kV / 10kA 20kV / 20kA (optional)
Driver included
Yes
ROHS compliant
Yes
Electromagnetic compatibility (EMC)
SANS 55015:2013/A1:2015, SANS 61000-3-2:2014, SANS 61000-3- 3:2013, SANS 61547:2009, SANS 62493:2015
Testing standard
SANS 60598, SANS 62262
80
650
0.72
25199
165
152
22679
137
HOUSING AND FINISH Housing
Control options
1-10V DALI Schréder ITERRA Integrated daylight switch
Marine grade high-pressure die-cast aluminium (EN 1706 AC-44300)
Tolerance on LED flu x is ± 7% and on total luminaire power ± 5% (*) The nominal flux is an indicative LED flux @ Ts 85°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental conditions (e.g. temperature and pollution) and the optical efficiency of luminaire. The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology. (**) Custom combinations of lenses/optics to suit the project are available on request.
Optic
PMMA
Protector
Tempered glass
Housing finish
Unpainted aluminium
OPTICAL INFORMATION LED colour temperature 4000K (Neutral white 840) 5700K (Cool white 857) Colour rendering index (CRI) ≥ 80 (Neutral white 840) ≥ 80 (Cool white 857) Upward Light Output Ratio (ULOR) 0%
Tightness level
IP 66
Impact resistance Up to IK 08 Access for maintenance Door with screws enables access to the photometrical engine and electronic compartment
DIMENSIONS AND MOUNTING AxBxC (mm)
LensoFlex ® 4
575x375x50
OPERATING CONDITIONS Operating temperature range (Ta)
Weight (kg)
10
-30°C up to +40°C (*)
LensoFlex ® 4 maximises the heritage of the LensoFlex ® concept with a very compact yet powerful photometric engine based upon the addition principle of photometric distribution. The number of LEDs in combination with the driving current determines the intensity level of the light distribution. With optimised light distributions and very high efficiency, this fourth generation enables the products to be downsized to meet application requirements with an optimised solution in terms of investment. LensoFlex ® 4 optics can feature backlight control to prevent intrusive lighting, or a glare limiter for high visual comfort.
0.1725
Aerodynamic resistance (CxS) (m 2 )
(*) Depending on the luminaire inclination and driving current and only applicable for outdoor use. For more details, please contact us.
Mounting
Stirrup enabling adjustable inclination on-site
LIFETIME OF THE LEDS @ TQ 25°C For all versions
100,000h - L95B10
LIFETIME OF THE DRIVER @ TQ 25°C For all versions
100,000h ≤10% failure rate
BlastFlex TM 4
Using collimators made of high-transmission PMMA, the BlastFlex™4 photometric engine offers the highest efficiency for directional beams dedicated to specific applications in architectural and sports lighting. The ability to control the light with the highest accuracy reduces light spill in the surroundings, improves uniformity on the area to be lit and contributes to optimal use of the energy consumed.
200mm
B
C
Ø18mm
342
343
Powered by FlippingBook