Key Features
Performance
Nominal efficacy (lm/W)
Power consumption (W)
Nominal flux (lm) (1)
Driver Current (mA)
Line Current (A)
Luminaire
Typical
Typical
Typical
500
0.06
1950
13
150
500
0.08
2920
19
154
Tolerance on LED flu x is ± 7% and on total luminaire power ±5% (1) The nominal flux is an indicative LED flux @ Ts 85°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental conditions (e.g. temperature and pollution) and the optical efficiency of luminaire. The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology.
Highly efficient LED light source and no spill light emitted in upward direction
Marine grade (EN 1706 AC-44300) high-pressure die-cast aluminium housing
Light Distribution
Symmetrical
40 20 60 80
cd/klm
Installation is made easy through the simple base flange assembly. Through-wiring is also possible.
90
60
30
0
Construction Details The LEDPOST is a bollard luminaire that has been designed for orientation lighting and security marking. The bollard consists of a high-pressure die-cast head containing the LED light source and optic, as well as a pole base assembly. The control gear is integrated within the cross shaped aluminium extruded pole. The distinct design shields pedestrians and drivers from glare and prevents spill light from being emitted above the horizontal. The bollard head assembly is permanently sealed to IP 66 and firmly fixed to the pole. It can be conveniently replaced or upgraded. The optical system, in conjunction with the prismatic diffuser, provides highly efficient and low-level lighting with maximum glare control. The LEDs are designed for ambient temperatures of up to 35˚C, resulting in a useful lifetime of approximately 100 000 operating hours (L90B10). The LEDs are effective high-power LEDs, 4000K at a colour rendering index ≥70. To maximize the reliability of the LEDs, the photometric engine is completely sealed to IP 66. This ensures that the photometric performance is maintained over time. Electronic temperature monitoring prevents overheating of LEDs and power supply, positioned directly next to LEDs (ThermiX ® ). It is designed to operate LEDs of up to 19W. The power factor is rated at ≥0,95.
0°/180°
90°/270°
90°
0°
180°
270°
318
319
Powered by FlippingBook