BEKA Schréder - Smart and sustainable lighting solutions

Key Features

Performance

Power consumption (W)

Nominal efficacy (lm/W)

Luminaire output flux (lm)

Luminaire efficacy (lm/W)

Nominal flux (lm) (*)

Driver Current (mA)

Line Current (A)

Number of LEDs

Luminaire

Typical

Typical

Typical

Typical

Typical

36

350

0.08

2916

19

153

2041

107

72

700

0.17

5832

38

153

4082

107

Tolerance on LED flu x is ± 7% and on total luminaire power ± 5% (*) The nominal flux is an indicative LED flux @ Ts 85°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental conditions (e.g. temperature and pollution) and the optical efficiency of luminaire. The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology.

No upward lighting

The LEDSHINE is available without the glare-shield

Light Distribution

Different housing colours possible

Non-discolouring UV-stabilised acrylic anti-glare louvres and protector

LEDSHINE

cd/klm

125

75

25

90

60

30

Construction Details

0

0°/180°

90°/270°

40°/140°

90°

The luminaire consists of a spigot base, top casting, glare shield, lamp compartment with integral control gear and diffuser that is held in position by three extruded aluminium tie bars. The castings are manufactured from high-pressure die-cast aluminium (EN 1706 AC-44300), powder coated for added protection in the colour specified, with the underside of the glare shield being white for added reflectivity. The diffuser is manufactured from non-discolouring clear high-impact acrylic. It is seamless and smooth on both the inside and outside. The luminaire is secured to the pole by three M8 stainless steel grub screws. The luminaire bears the SANS 60598-2-3 safety mark. The luminaire has a degree of protection that complies with SANS 60598-2-3: Lamp compartment: IP 65. The IP rating is certified by an SABS test report. The LEDs are effective high-power LEDs, 4000K at a colour rendering index ≥80. The electronic power supply is suitable for operation with a 198-264V 50Hz single phase system. The power factor is rated at ≥0,95. It is designed for LED light sources of 38W.

180°

270°

260

261

Powered by