Key Features
The luminaire consists of an LED engine, power supply and spigot compartment. This allows the easy installation of the LED engine by means of a hinging action onto a spigot base casting.
The LED engine, consisting of the
Surge protection: 10kV/10kA Optional: 20kV/20kA
LED light source and the power supply, can be easily replaced or upgraded.
Optional: A tamper-proof screw ensures controlled access by means of a special coded tool. The power supply is automatically disengaged when opening the luminaire.
LEDLUME
Circularity concept
The luminaire housing is manufactured of marine-grade aluminium.
Circularity focuses on reducing the environmental burden by valorising the flow of all materials. It is mainly defined in opposition to the traditional linear economy: take, make and dispose. In a circular economy, products are part of a value network where they will be used for as long as possible. Then, depending on their characteristics, they can be reused, refurbished, upgraded or recycled. BEKA Schréder takes circular economy into account, right from the offset. Before we start to design our products, we incorporate it into their DNA. After a careful analysis of the potential circularity of our luminaires, we decided to introduce a “circular lighting” product label. This label acts as a circular indicator for our customers. It clearly designates products that are optimised for circular economy through 12 objective criteria.
extracting raw materials
Electronic temperature
The electronic power supply is
monitoring prevents overheating of LEDs and power supply.
suitable for operation with a 198-264V 50Hz single phase system. (DC versions are available). The power factor is rated at ≥0,95. The efficiency is rated 89%.
parts supply
recycle
Each LED is equipped with a lens to provide the desired light distribution.
manufacturing
parts harvesting
Side entry ø42mm * 125mm
refurbish
The protector is manufactured from high-impact clear flat glass or polycarbonate.
Special use of stainless steel inserts to prevent galvanic corrosion between stainless steel and aluminium, allowing future removal of the luminaire from the spigot.
distribution
Circular highlights:
service
• Tool-free opening of the gear
compartment for easy maintenance
Levelling device
To maximize the reliability of the LEDs, the photometrical engine is completely sealed to
user
IP 66. This ensures that the photometric performance is maintained over time.
Secured by stainless steel latches and access screw.
• Equipped with a completely replaceable LED engine
incineration & landfill
• Less than 9 steps to completely disassemble the luminaire
•
Materials with a high rate of recyclability
Star rating:
Optional levelling spigot adaptors: Bottom entry Ø76mm (0° to +15°) spigot or Side entry Ø42-48mm (+15° to -15°) spigot
Integrated vent (breather) for rapid pressure equalisation and reduction of condensation
It was designed to be cost-efficient
It was built to last but not with circular economy requirements
It was developed to meet most of circular economy requirements
It was developed to fully meet circular economy requirements
164
165
Powered by FlippingBook