Key Features
The luminaire design is based on a three-compartment concept, consisting of an LED engine, power supply and spigot compartment. This allows for easy installation without the risk of jeopardizing the IP integrity of the luminaire. Furthermore, the hinging concept allows the easy replacement of the LED engine in case of future upgrades or maintenance.
The LED engine, consisting of the
Surge protection: 10kV/10kA Optional: 20kV/20kA
LED light source and the power supply, can be easily replaced or upgraded.
The power supply is automatically disengaged when opening the luminaire.
The luminaire housing is manufactured of marine-grade aluminium.
Optional levelling spigot adaptors: Bottom entry Ø76mm or Side entry Ø42-48mm spigots
Integrated vent (breather) for rapid pressure equalisation and reduction of condensation
The electronic power supply is
Electronic temperature
suitable for operation with a 198-264V 50Hz single phase system. (DC versions are available). The power factor is rated at ≥0,95. The efficiency is rated 89%.
monitoring prevents overheating of LEDs and power supply.
Each LED is equipped with a lens to provide the desired light distribution.
Levelling device
Side entry ø42mm * 125mm
The protector is manufactured from high-impact clear flat glass or polycarbonate.
Special use of stainless steel inserts to prevent galvanic corrosion between stainless steel and aluminium, allowing future removal of the luminaire from the spigot
Thermal separation between gear and optical compartment, ensuring maximum lifetime of electronic components (excludes LEDLUME XP 4)
Separate connector compartment, preventing the risk of jeopardizing the IP integrity of the luminaire during installation
To maximize the reliability of the LEDs, the photometrical engine is completely sealed to
Secured by stainless steel latches and access screw
IP 66. This ensures that the photometric performance is maintained over time.
Slim, aesthetical design with very low fin height to prevent any dirt or debris accumulation between the fins, maximising thermal dissipation during luminaire lifetime
NEMA 7-Pin complete with plug-in surge protection for easy replacement
150
151
Powered by FlippingBook