Circle light
Remarks:
(1) The luminaire’s efficacy is the ratio between the output flux (F) and the consumed power (P). This measurement is carried out at 500mA with the maximum number of LEDs. When this configuration is not available, the variant with the maximum number of LEDs and highest current will be measured. (2) The mechanical criteria takes into account the IP and IK level of the luminaire. Our criteria is as follows:
LEVEL 2
LEVEL 1
LEVEL 3
Any luminaire with an IK level equal or below IK 07. Or any luminaire with an IP level between IP 54 and IP 66
Any luminaire with an IP level equal or over IP 66 and an IK level equal or above IK 08
Any luminaire with an IP level equal or below IP 54
(3) A luminaire is considered smart ready if it can integrate an IoT solution. An open smart solution is a Nema or Zagha (ZD4I) socket. (4) This factor ensures that it is feasible and practical for a professional to access components after the luminaire has been put into service. (5) The replacement parts should be the same as the originals, but if this is not possible, equivalent spare parts that perform the same function to the same or higher performance level may be used. (6) The disassembly depth is the minimum number of steps required to remove a component from a product. (7) The criteria focuses on the luminaire’s main parts (body and reflector) with materials recognised by Schréder Group staff and R-Tech.
3
Powered by FlippingBook